.png){kind=icon}
返回
High-sensitivity microfiber interferometer water hardness sensor
.png){kind=icon}
PRE
AI
DOI：10.1016/j.measurement.2022.111710.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A microfiber interferometer water hardness sensor is proposed, and its capabilities are demonstrated in an experiment. The sensor is fabricated by using a piece of microfiber with a diameter of 10.4 mu m formed via the heating melt stretching technique. At this scale diameter, a strong evanescent field is generated on the surface of the microfiber, which is very sensitive to the external environmental parameters. Thus, water hardness can be detected by measuring the strength of the interaction between the evanescent field and the concentration of calcium ions (Ca2+) in water. The experimental results show that the microfiber interferometer sensor can accurately detect water hardness. The maximum sensitivity obtained in the experiment is 0.395 nm/(100 mg/L). The proposed sensor exhibits the advantages of easy fabrication, simple structure, cost-effective, fast response and high sensitivity, and has the potential applications in the fields of medicine, biological, chemical, and environmental concentration monitoring.
Keyword:
Water hardness
Microfiber sensor
Calcium ions
期刊
IF:
5.6
论文数:
2.0W
被引数:
5.4W
机构
引用论文
In-situ DNA hybridization detection with a reflective microfiber grating biosensor反射式微纤维光栅生物传感器原位DNA杂交检测
OAAI
OAAI分享收藏Tailoring the Field Distribution of ZnO by Polyaniline for SPR-Based Fiber Optic Detection of Hardness of the Drinking Water.png)
PLASMONICS
PLASMONICSIF4.3
PREAI
分享收藏Rapid determination of total hardness in water using fluorescent molecular aptamer beacon荧光分子适体信标快速测定水中总硬度
PREAI
分享收藏分享收藏
查看更多内容