.png){kind=icon}
返回
Highly Sensitive, Stretchable, and Adjustable Parallel Microgates-Based Strain Sensors
.png){kind=icon}
OA
AI
DOI：10.1002/admt.202400071.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The demand for stretchable strain sensors with customizable sensitivities has increased across a spectrum of applications, spanning from human motion detection to plant growth monitoring. Nevertheless, a major challenge remains in the digital fabrication of scalable and cost-efficient strain sensors with tailored sensitivity to diverse demands. Currently, there is a lack of simple digital fabrication approaches capable of adjusting strain sensitivity in a controlled way with no changes to the material and without affecting the linearity. In this study, parallel microgates-based strain sensors whose strain sensitivity can be adjusted systematically throughout an all-laser-based fabrication process without any material replacement are presented. The technique employs a two-step direct laser writing method that combines the well-established capabilities of laser ablation and laser marking, boasting a varying gauge factor of up to 433% (GF = 168), while paving the way for the mass production of nanocomposite strain sensors. Parallel microgates-based strain sensors exhibit a remarkable signal-to-noise ratio at ultralow strains (epsilon = 0.001), rendering them ideal for monitoring the gradual growth of plants. As an application demonstration, the proposed sensors are deployed on tomato plants to capture their growth under varying planting conditions including hydroponic and soil mediums, as well as diverse irrigation regimens. A rapid, scalable, all-laser digital fabrication method creates stretchable strain sensors with engineered 2D patterns of adjustable microgates on their surfaces, inducing high localized strain. The microgates amplify the signal-to-noise ratio at ultralow strains, enhancing sensitivity by up to 433% without material modification. These highly sensitive strain sensors effectively monitor tomato plant growth under diverse planting and irrigation conditions. image
Keyword:
adjustable sensitivity
direct laser writing
laser-induced graphene
parallel microgates
plant growth monitoring
strain sensor
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.2
论文数:
5.3K
被引数:
2.4W
机构
引用论文
Polydimethylsiloxane Composites Characterization and Its Applications: A Review聚二甲基硅氧烷复合材料的表征及其应用综述.png)
POLYMERSOAAI
POLYMERSIF4.9
OAAI分享收藏Analytical formulation of the piezoresistive behavior of carbon nanotube polymer nanocomposites: The effect of temperature on strain sensing performance碳纳米管聚合物纳米复合材料压阻行为的分析公式: 温度对应变传感性能的影响
PREAI
分享收藏Three-dimensional graphene foam based triboelectric nanogenerators for energy systems and autonomous sensors用于能源系统和自主传感器的基于三维石墨烯泡沫的摩擦电纳米发电机NANO ENERGYOAAI
NANO ENERGYIF17.1
OAAI分享收藏Graphene-Coated Spandex Sensors Embedded into Silicone Sheath for Composites Health Monitoring and Wearable Applications石墨烯涂层氨纶传感器嵌入硅胶护套，用于复合材料健康监测和可穿戴应用SMALL
SMALLIF12.1
PREAI
分享收藏Comprehensive constitutive modeling and analysis of multi-elastic polydimethylsiloxane (PDMS) for wearable device simulationsSCIENTIFIC REPORTSOAAI
SCIENTIFIC REPORTSIF3.9
OAAI分享收藏分享收藏
查看更多内容