.png){kind=icon}
返回
Impact point localization in three-dimensional structures using wavelet transform
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ymssp.2022.109365.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Impact-induced anomalies such as travelling waves can be found in many devices or structures. This article provides an experimental method to localize a point of impact in three-dimensional structures using an array of redundant sensors. Concurrent measurement of vibration waveforms in moving measurement points and stationary reference allows determining the times of arrival of the travelling wave and, more importantly, times of arrival relative to the reference. These relative times of arrival allow for employing more measurement points than channels in the data acquisition system. This work proposes a modified method to estimate the times of arrival by combining continuous wavelet transform with optimal interval partitioning. The work also considers that the path between the impact and the measurement point depends on the properties of the structure, causing apparent wave speeds to differ across the measurement points. Therefore, regular triangulation and multilateration methods, which assume equal wave speeds, offer a reduced accuracy. The localization is solved as a constraint optimization problem considering variable apparent speeds.
Keyword:
Time of arrival
Continuous wavelet transform
Impact-induced vibration
Impact point localization
Damage localization
期刊
IF:
8.9
论文数:
1.3W
被引数:
6.6W
机构
引用论文
.png){kind=icon}
A review on machinery diagnostics and prognostics implementing condition-based maintenance实施状态维修的机械诊断和预测综述
PREAI
分享收藏Temperature induced conversion from surface to “bulk” sites in Eu3+-impregnated CeO2 nanocrystals
PREAI
分享收藏分享收藏Structural damage detection of controlled building structures using frequency response functions
PREAI
分享收藏
查看更多内容