.png){kind=icon}
返回
Improved Rate Capability in Composite Solid- State Battery Electrodes Using 3-D Architectures
.png){kind=icon}
PRE
AI
DOI：10.1021/acsenergylett.3c00528.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The limited rate capability observed at faster charging rates is a critical challenge for composite electrodes in solid-state batteries (SSBs). This becomes further amplified with increasing electrode thickness and higher ratios of active material to solid electrode, which result in trade-offs between energy and power density. To overcome these trade-offs, it is necessary to understand the factors responsible for poor rate capability by exploring new approaches to boost power density without compromising energy density. Herein, we fabricated 3-D patterned composite graphite (Gr/Li6PS5Cl) electrodes with low-tortuosity electrolyte channels using a templating approach. Graphite was chosen as a model system to study inhomogeneous lithiation in composite SSB electrode architectures because of the visible color changes that occur as a function of local state-of-charge. At faster cycling rates (1C), the 3-D patterned electrodes enabled considerably higher accessible capacity (38% increase) compared to the unpatterned control electrodes. These enhancements were visualized using operando video microscopy, where 3-D electrode architectures showed improved homogeneity in the local state-of-charge throughout the electrode thickness. The insights presented here will enable new strategies based on 3-D electrode architectures to overcome power/energy trade-offs in SSBs.
Keyword:
ENERGY DENSITY
ION
GRAPHITE
PERFORMANCE
STRATEGIES
DESIGN
ISSUES
LAYERS
期刊
IF:
18.2
论文数:
5.2K
被引数:
6.6W
机构
引用论文
Tunable Porous Electrode Architectures for Enhanced Li-Ion Storage Kinetics in Thick Electrodes用于增强厚电极中锂离子存储动力学的可调多孔电极结构.png)
NANO LETTERS
NANO LETTERSIF9.1
PREAI
分享收藏Performance-limiting factors of graphite in sulfide-based all-solid-state lithium-ion batteries硫化物基全固态锂离子电池中石墨的性能限制因素ELECTROCHIMICA ACTA
OAAI
ELECTROCHIMICA ACTAIF5.6
OAAI分享收藏Review-Practical Challenges Hindering the Development of Solid State Li Ion Batteries回顾-阻碍固态锂离子电池发展的实际挑战OAAI
OAAI分享收藏Operando detection of Li plating during fast charging of Li-ion batteries using incremental capacity analysis使用增量容量分析在锂离子电池快速充电过程中对锂镀层进行操作检测OAAI
OAAI分享收藏Extremely fast-charging lithium ion battery enabled by dual-gradient structure design通过双梯度结构设计实现极快充电的锂离子电池SCIENCE ADVANCESOAAI
SCIENCE ADVANCESIF12.5
OAAI分享收藏Effect of Electrode and Electrolyte Thicknesses on All-Solid-State Battery Performance Analyzed With the Sand Equation用Sand方程分析电极和电解质厚度对全固态电池性能的影响OAAI
OAAI分享收藏Challenges, interface engineering, and processing strategies toward practical sulfide-based all-solid-state lithium batteries基于硫化物的全固态锂电池的挑战，界面工程和加工策略INFOMATOAAI
INFOMATIF22.3
OAAI分享收藏Dynamically visualizing battery reactions by operando Kelvin probe force microscopy通过operando Kelvin探针力显微镜动态可视化电池反应OAAI
OAAI分享收藏
查看更多内容