.png){kind=icon}
返回
Improved RCSA technique for efficient tool-tip dynamics prediction
.png){kind=icon}
PRE
AI
DOI：10.1016/j.precisioneng.2015.11.004.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Chatter prediction requires Frequency Response Function (FRF) at the tool-tip, which can be reliably identified by modal testing. However this procedure is time-consuming and unsuitable for industrial application since measurements must be performed for each tool attached to the machine. Receptance coupling technique can be adopted to speed up FRF identification. This technique computes tool-tip response combining experimental spindle-holder dynamics with numerical/analytical model of the tool. The main drawback is to identify rotational degree of freedom responses that are generally obtained by performing additional calibrations tests. This work presents a new method overcoming this limitation, obtaining rotational responses by a novel inverse formulation that reduces the number of required experiments. The proposed method is based on receptance coupling theory and requires FRF measurements of a single machine setup, thus increasing the efficiency of receptance coupling approach for tool-tip FRF prediction. The proposed technique is proven by experimental validation and the same accuracy of state of the art methods is obtained. (C) 2015 Elsevier Inc. All rights reserved.
Keyword:
Chatter
Receptance coupling substructure analysis
Dynamics
Finite element
Milling
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
机构
引用论文
.png){kind=icon}
分享收藏
Improving high-speed machining material removal rates by rapid dynamic analysis通过快速动态分析提高高速加工材料去除率
PREAI
分享收藏
查看更多内容