.png){kind=icon}
返回
Induction Machine Rapid Performance Test
.png){kind=icon}
PRE
AI
DOI：10.1109/TIA.2019.2924409.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Efficiency Test Method A is used in industry to determine the efficiency of induction motors. However, in this method, which is carried out by using a dynamometer, the machine under test shall be brought up to its thermal equilibrium before the data can be collected. This requires running themachine under full load for a considerable amount of time (around 8-h), which implies high cost associated with this test. This paper presents a new simple technique that can significantly reduce the time required for induction machine full-load tests. The proposed technique needs only 30 min of a machine run under full-load conditions. The temperature-speed relationship is the key point in this research work. This relationship is utilized to estimate themachine's full-load temperature. The accuracy of the proposed algorithm is validated by testing two small and two medium-sized machines. The results show acceptable level of accuracy, when they are compared to the corresponding 8-h dynamometer tests conducted on the same machines. The technique can save time and cost associated with the dynamometer test. The proposed algorithm is valid only for totally enclosed fan-cooled type induction motors.
Keyword:
BC Hydro
CAN/CSA C390
estimated efficiency
hot temperature
Hydro-Quebec
IEEE Standard 112-B
induction motor
nameplate
rapid test
stray-load loss
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.5
论文数:
1.1W
被引数:
3.5W
机构
引用论文
.png){kind=icon}
分享收藏
查看更多内容