Return
Influence of post-synthesis acid treatments on Pt/C catalyst properties prepared by polyol method for oxygen reduction reaction in proton exchange membrane fuel cells
H
D
L
DOI:10.1016/j.materresbull.2026.114370.png)
Abstract
En 中文
• Eight post-synthesis acid treatments were systematically compared under identical polyol-derived Pt/C preparation conditions. • Citric acid treatment at pH 2 achieved 99% Pt loading efficiency and an ECSA of 106.2 m2 gPt−1. • The citric acid-treated catalyst delivered an ORR mass activity of 0.279 A mgPt−1, exceeding that of commercial Pt/C. • After 30,000 potential cycles, the citric acid-treated catalyst showed a lower ECSA loss than commercial Pt/C (25.3% vs. 42.3%).
Keywords:
Proton exchange membrane fuel cells
Oxygen reduction reaction
Pt-based catalyst
Polyol method
Acid treatment
Journal
IF:
5.7
Papers:
1.3W
Citations:
2.9W
