.png){kind=icon}
返回
Initial postbuckling behavior of thin-walled frames under mode interaction
.png){kind=icon}
PRE
AI
DOI：10.1016/j.tws.2013.03.004.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
An L frame made up by beam and column having channel cross sections, has been analyzed in a previous work by two of the authors [14]. Depending on the aspect ratio and the joint configuration, it has been proved that the structure can exhibit two simultaneous buckling modes. Here using the asymptotic theory of elastic bifurcation that takes into account mode interaction, the initial slope of the bifurcated paths has been determined. Three cases of joint configurations, which are the more common used in welded connections, have been considered. For each case three admissible bifurcated paths have been found. Two of them show a slope having the same order of magnitude of the ones found in the absence of mode interaction while the remaining exhibits a slope largely steepest. Selecting, for each joint case, the bifurcated path with the higher slope and between them the smallest one, it is found that it is associated to the path which bifurcates at the higher critical load. This means that the stiffer structure is also the less imperfection sensitive. Finally for each one of the cases studied, the effect of initial imperfection has been considered and the real load carrying capacity of the frames has been determined. Finally some results have been compared with those obtained using the FE code ABAQUS. (C) 2013 Elsevier Ltd. All rights reserved.
Keyword:
Thin-walled structures
Flexural-torsional buckling
Mode interaction
Imperfection sensitivity
期刊
T
IF:
6.6
论文数:
1.1W
被引数:
4.0W
机构
引用论文
.png){kind=icon}
An Improved and High Throughput Respiratory Syncytial Virus (RSV) Micro-neutralization Assay改进的高通量呼吸道合胞病毒（RSV）微中和试验
PREAI
分享收藏分享收藏
Torsion warping transmission at thin-walled frame joints: Kinematics, modelling and structural response薄壁框架接头处的扭转翘曲传输: 运动学，建模和结构响应
PREAI
分享收藏分享收藏
查看更多内容