.png){kind=icon}
返回
Integrated multilateration for machine tool automatic verification
.png){kind=icon}
PRE
AI
DOI：10.1016/j.cirp.2018.04.008.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Multilateration based approaches are widely accepted as the most adequate solution for geometric characterisation of medium and large machine tools. However, its application, either in a sequential mode or in a simultaneous approach, leads to industrial limitations such as total time consumption or thermal drift that prevent an automatic calibration. This work presents an integrated multilateration verification procedure where a tracking interferometer is directly attached to the manufacturing system spindle as a tool, which tackles several of the mentioned limitations. Results of both simulations and experimental tests show that levels of uncertainty in the range of micrometres can be guaranteed. (C) 2018 Published by Elsevier Ltd on behalf of CIRP.
Keyword:
Machine tool
Calibration
Multilateration
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
C
IF:
3.6
论文数:
3.4K
被引数:
1.3W
机构
引用论文
Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification测量噪声和激光布置对激光跟踪仪多点定位机床体积检定测量不确定度的影响
.png){kind=icon}
PREAI
分享收藏
没有更多内容
没有更多内容