.png){kind=icon}
返回
Interface design for all-solid-state lithium batteries
.png){kind=icon}
PRE
AI
DOI：10.1038/s41586-023-06653-w.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The operation of high-energy all-solid-state lithium-metal batteries at low stack pressure is challenging owing to the Li dendrite growth at the Li anodes and the high interfacial resistance at the cathodes(1-4.) Here we design a Mg16Bi84 interlayer at the Li/Li6PS5Cl interface to suppress the Li dendrite growth, and a F-rich interlayer on LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes to reduce the interfacial resistance. During Li plating-stripping cycles, Mg migrates from the Mg16Bi84 interlayer to the Li anode converting Mg16Bi84 into a multifunctional LiMgSx-Li3Bi-LiMg structure with the layers functioning as a solid electrolyte interphase, a porous Li3Bi sublayer and a solid binder (welding porous Li3Bi onto the Li anode), respectively. The Li3Bi sublayer with its high ionic/electronic conductivity ratio allows Li to deposit only on the Li anode surface and grow into the porous Li3Bi sublayer, which ameliorates pressure (stress) changes. The NMC811 with the F-rich interlayer converts into F-doped NMC811 cathodes owing to the electrochemical migration of the F anion into the NMC811 at a high potential of 4.3 V stabilizing the cathodes. The anode and cathode interlayer designs enable the NMC811/Li6PS5Cl/Li cell to achieve a capacity of 7.2 mAh cm(-2) at 2.55 mA cm(-2), and the LiNiO2/Li6PS5Cl/Li cell to achieve a capacity of 11.1 mAh cm(-2) with a cell-level energy density of 310 Wh kg(-1) at a low stack pressure of 2.5 MPa. The Mg16Bi84 anode interlayer and F-rich cathode interlayer provide a general solution for all-solid-state lithium-metal batteries to achieve high energy and fast charging capability at low stack pressure.
Keyword:
EVOLUTION
PHASE
期刊
IF:
48.5
论文数:
1.8W
被引数:
96.5W
机构
引用论文
High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes银-碳复合阳极支持的高能量长循环全固态锂金属电池.png)
NATURE ENERGY
NATURE ENERGYIF60.1
PREAI
分享收藏High-Power Hybrid Solid-State Lithium-Metal Batteries Enabled by Preferred Directional Lithium Growth Mechanism通过优选的定向锂生长机制实现的高功率混合固态锂金属电池ACS ENERGY LETTERS
OAAI
ACS ENERGY LETTERSIF18.2
OAAI分享收藏High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes氯化物固体电解质支持的高面积容量、长循环寿命4 v陶瓷全固态锂离子电池NATURE ENERGY
NATURE ENERGYIF60.1
PREAI
分享收藏Tin Interlayer at the Li/Li3PS4 Interface for Improved Li Stripping/Plating PerformanceLi/Li3PS4界面处的Tin中间层可改善Li剥离/电镀性能
PREAI
分享收藏Understanding the Effect of Interlayers at the Thiophosphate Solid Electrolyte/Lithium Interface for All-Solid-State Li Batteries了解中间层对全固态锂电池硫代磷酸盐固体电解质/锂界面的影响
OAAI
OAAI分享收藏Porous Mixed Ionic Electronic Conductor Interlayers for Solid-State Batteries用于固态电池的多孔混合离子电子导体中间层ENERGY MATERIAL ADVANCESOAAI
ENERGY MATERIAL ADVANCESIF15.9
OAAI分享收藏Electrochemo-Mechanical Effects on Structural Integrity of Ni-Rich Cathodes with Different Microstructures in All Solid-State Batteries电化学机械效应对全固态电池中具有不同微观结构的富镍阴极结构完整性的影响
PREAI
分享收藏Stabilizing Li7P3S11/lithium metal anode interface by in-situ bifunctional composite layer原位双功能复合层稳定Li7P3S11/锂金属阳极界面
PREAI
分享收藏
查看更多内容