.png){kind=icon}
返回
Interlayer-Engineering and Surface-Substituting Manganese-Based Self-Evolution for High-Performance Potassium Cathode
.png){kind=icon}
PRE
AI
DOI：10.1002/aenm.202203126.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Manganese-based layered oxides cathodes have attracted enormous interest due to their advantages in cost and energy density. The significant challenges of Mn-based layered oxides for potassium-ion batteries (PIBs) are complex phase transition and Mn dissolution upon K+ intercalation/deintercalation. Here, a P3-type K0.45RB0.05Mn0.85Mg0.15O2 (KRMMO) cathode material is proposed to address the above challenges. The results show that rubidium acts as a pillar to expand interlayer spacing and stabilize the structure, while magnesium partially replaces Mn to suppress the Jahn-Teller distortion of the Mn3+. The KRMMO cathode exhibits high capacity of 108.0 and 77.3 mAh g(-1) at 20 and 500 mA g(-1), respectively, and retains 98.2% of its initial capacity after 200 cycles. Compared with P3-K0.5MnO2, the capacity fading of P3-KRMMO is effectively suppressed, which is mainly due to the synergistic contribution of Rb and Mg ions in the alleviation of volume change and suppression of phase transition. This work may open a new avenue for the design and optimization of layered cathode materials for PIBs and beyond.
Keyword:
interlayer engineering
manganese-based layered oxides
potassium cathodes
self-evolution
surface substituting
期刊
IF:
26
论文数:
1.0W
被引数:
15.7W
机构
引用论文
Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery用于高能量和长循环钠离子电池的P2层状氧化物阴极的调谐局部化学.png)
NATURE COMMUNICATIONS
OAAI
NATURE COMMUNICATIONSIF15.7
OAAI分享收藏A First-Principles and Experimental Investigation of Nickel Solubility into the P2 NaxCoO2 Sodium-Ion Cathode镍在P2 NaxCoO2钠离子阴极中的溶解度的第一性原理和实验研究OAAI
OAAI分享收藏Atomic-Scale Design of Anode Materials for Alkali Metal (Li/Na/K)-Ion Batteries: Progress and Perspectives碱金属 (Li/Na/K) 离子电池负极材料的原子级设计: 进展与展望OAAI
OAAI分享收藏A P3-Type K1/2Mn5/6Mg1/12Ni1/12O2 Cathode Material for Potassium-Ion Batteries with High Structural Reversibility Secured by the Mg-Ni Pinning Effect用于钾离子电池的P3-Type K1/2Mn5/6Mg1/12Ni1/12O2正极材料，具有由mg-ni钉扎效应确保的高结构可逆性
PREAI
分享收藏P3-Type K0.45Co1/12Mg1/12Mn5/6O2 as a superior cathode material for potassium-ion batteries with high structural reversibility ensured by Co-Mg Co-substitutionP3-Type K0.45Co1/12Mg1/12Mn5/6O2作为钾离子电池的优异正极材料，通过co-mg共取代确保了高结构可逆性
PREAI
分享收藏Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping通过镧和铝掺杂接近锂离子电池中锂钴氧化物的容量极限NATURE ENERGY
NATURE ENERGYIF60.1
PREAI
分享收藏Recent advances in emerging nonaqueous K-ion batteries: from mechanistic insights to practical applications新兴非水K离子电池的最新进展: 从机理见解到实际应用ENERGY STORAGE MATERIALS
ENERGY STORAGE MATERIALSIF20.2
PREAI
分享收藏Construction of hierarchical K0.7Mn0.7Mg0.3O2 microparticles as high capacity & long cycle life cathode materials for low-cost potassium-ion batteries构建分层K0.7Mn0.7Mg0.3O2微粒作为低成本钾离子电池的高容量和长循环寿命阴极材料
PREAI
分享收藏Layered P3-Type K0.4Fe0.1Mn0.8Ti0.1O2 as a Low-Cost and Zero-Strain Electrode Material for both Potassium and Sodium Storage层状P3-Type K0.4Fe0.1Mn0.8Ti0.1O2作为用于钾和钠存储的低成本和零应变电极材料
PREAI
分享收藏
查看更多内容