.png){kind=icon}
返回
ITER neutral beam system
.png){kind=icon}
PRE
AI
DOI：10.1088/0029-5515/40/3Y/309.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Since the main features of the design of the neutral beam (NB) system for the International Thermonuclear Experimental Reactor (ITER) were first reported, integration with the tokamak and with the rest of the plant has been the main priority. Moreover, operational requirements and maintainability have been considered in the evolution of the design. Each of the three NE injectors is connected to the tokamak vacuum vessel with the NE duct on an equatorial port. The article describes the integration of the NE port/duct with the blanket, the vacuum vessel, the toroidal field and poloidal field coils, the cryostat and the bioshield. Two main design modifications are reported. The insulation of the source, originally done with compressed gas, is now achieved with vacuum to limit the power losses caused by the radiation induced conductivity. Large cylindrical insulators are still required but their inner diameter has been reduced from 2.7 to 1.8 m. The improvements on the compensation system needed to reduce the magnetic field in the NE volume are also described. Finally, the progress in R&D for the ITER NE system is reported, including an overview of the achievements in the critical areas of negative ion production at high current density (tests of a large size, low pressure, steady state caesiated ion source), acceleration up to 1 MV (tests of two alternative accelerator concepts) and neutralization (tests of an experimental plasma neutralizer to investigate it as an alternative to the gas target neutralizer).
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
.png){kind=icon}
