.png){kind=icon}
返回
Knowledge-Based Design Algorithm for Support Reduction in Material Extrusion Additive Manufacturing
.png){kind=icon}
OA
AI
DOI：10.3390/mi13101672.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Although additive manufacturing (AM) enables designers to develop products with a high degree of design freedom, the manufacturing constraints of AM restrict design freedom. One of the key manufacturing constraints is the use of support structures for overhang features, which are indispensable in AM processes, but increase material consumption, manufacturing costs, and build time. Therefore, controlling support structure generation is a significant issue in fabricating functional products directly using AM. The goal of this paper is to propose a knowledge-based design algorithm for reducing support structures whilst considering printability and as-printed quality. The proposed method consists of three steps: (1) AM ontology development, for characterizing a target AM process, (2) Surrogate model construction, for quantifying the impact of the AM parameters on as-printed quality, (3) Design and process modification, for reducing support structures and optimizing the AM parameters. The significance of the proposed method is to not only optimize process parameters, but to also control local geometric features for a better surface roughness and build time reduction. To validate the proposed algorithm, case studies with curve-based (1D), surface-based (2D), and volume (3D) models were carried out to prove the reduction of support generation and build time while maintaining surface quality.
Keyword:
additive manufacturing
support reduction
knowledge base
design modification
process optimization
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3
论文数:
1.4W
被引数:
2.9W
机构
引用论文
Improvement of FDM parts' surface quality using optimized neural networks - medical case studies使用优化的神经网络改善FDM零件的表面质量-医学案例研究
PREAI
分享收藏
Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters基于关键打印参数选择的熔融沉积成型 (FDM) 打印样品的表面质量增强.png)
MATERIALSOAAI
MATERIALSIF3.2
OAAI分享收藏分享收藏The Use of Nanoscale Montmorillonite (MMT) as Reinforcement for Polylactide Acid (PLA) Prepared by Fused Deposition Modeling (FDM)-Comparative Study with Biocarbon and Talc FillersMATERIALSOAAI
MATERIALSIF3.2
OAAI分享收藏
查看更多内容