Laboratory cake filtration testing using constant rate

doi:10.1016/j.cherd.2012.11.012

2013-06-01

PRE

Mandi, F. M.

Richard G. Holdich *

DOI：10.1016/j.cherd.2012.11.012

原文链接

原文求助

摘要

En 中文

A precipitated calcium carbonate with Sauter mean diameter of 7.5 mu m was filtered under conditions of constant rate and constant pressure in a comparative laboratory investigation. The specific cake resistance to filtration was found to vary between 1 x 10(9) and 1 x 10(11) m kg(-1), depending on the applied pressure, and the corresponding filter cake volume concentrations were between 0.42 and 0.54 (v/v). The calculated specific resistance, from the particle size distribution data and the Kozeny-Carman equation is one order of magnitude lower than that measured, even though the solids were extremely robustly characterised. Practical filter testing rather than design based on size distributions is known to be essential. However, the conventional approach is to use constant pressure laboratory tests, the results presented here demonstrate that constant rate filtration is a more reliable method for data acquisition, especially when determining the filter medium resistance, and readily available laboratory equipment is adequate for use. (C) 2012 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Keyword:

Vacuum filtration

Calcium carbonate

Resistance

Cake compressibility