.png){kind=icon}
返回
Laser Forming for Complex 3D Folding
.png){kind=icon}
PRE
AI
DOI：10.1002/admt.201700109.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Laser heating to generate plastic strains for controlled bending, known as laser forming, is a promising technique for creating 3D structures based on origami-inspired principles. Here, for the first time, laser cutting and forming are used to go from flat unpatterned metal sheet to final folded part, including up and down folds, all without manual handling. Folding direction is controlled by adjusting laser travel speed to create either a lateral or a vertical thermal gradient in the workpiece. Numerical modeling followed by experimental verification is used to determine the transition point between bending toward and away from the laser, followed by demonstration of a variety of complex 3D folded parts. Using this approach, laser forming is then used to precisely align two components, demonstrating the positioning of an optical reflector to guide the laser and pattern a portion of the sheeting originally inaccessible on the underside. All work here is done with a commercially available 20 W marking laser without modification.
Keyword:
laser cutting
laser forming
origami
self-folding
thermal residual stresses
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.2
论文数:
5.3K
被引数:
2.4W
机构
引用论文
分享收藏Programming Reversibly Self-Folding Origami with Micropatterned Photo-Crosslinkable Polymer Trilayers.png)
ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏分享收藏
查看更多内容