.png){kind=icon}
返回
Laser-frequency stabilization using light shift in compact atomic clocks
.png){kind=icon}
OA
AI
DOI：10.1103/PhysRevApplied.22.034033.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper describes the light-shift laser-lock (LSLL) technique, an alternative method intended for laser-based compact atomic clocks. The technique greatly simplifies the laser setup by stabilizing the pumping-laser frequency to the same atoms involved in the clock operation, without the need of an external reference. By alternating two clock sequences, the method estimates and cancels out a controlled amount of induced light shift, acting on the laser frequency. The LSLL technique is compatible with state-of-the-art three-level clocks and was demonstrated with field-programmable-gate-array-based electronics on a pulsed-optically-pumped vapor-cell clock developed at INRIM. The results have shown that the LSLL technique operates robustly, having a capture range of gigahertz without significantly compromising clock stability. In our tests, the clock exhibited a white frequency noise of 3.2 x 10(-13)tau(-1/2) for averaging times tau up to 4000 s, reaching a floor below 1x10(-14) up to 100000 s. This level of performance meets the requirements of future global navigation satellite systems on-board clocks, adding the benefits of a reduced clock footprint, as well as increased reliability and robustness.
Keyword:
NOISE
SPECTROSCOPY
ELECTRONICS
STANDARD
CAVITY
期刊
IF:
4.4
论文数:
7.1K
被引数:
2.8W
机构
引用论文
Realization of a pulsed optically pumped Rb clock with a frequency stability below 10-15.png)
SCIENTIFIC REPORTS
OAAI
SCIENTIFIC REPORTSIF3.9
OAAI分享收藏分享收藏分享收藏
查看更多内容