返回
LIDAR pulse coding for high resolution range imaging at improved refresh rate
DOI:10.1364/OE.24.023810.png)
摘要
En 中文
In this study, a light detection and ranging system (LIDAR) was designed that codes pixel location information in its laser pulses using the direct-sequence optical code division multiple access (DS-OCDMA) method in conjunction with a scanning-based microelectrome-chanical system (MEMS) mirror. This LIDAR can constantly measure the distance without idle listening time for the return of reflected waves because its laser pulses include pixel location information encoded by applying the DS-OCDMA. Therefore, this emits in each bearing direction without waiting for the reflected wave to return. The MEMS mirror is used to deflect and steer the coded laser pulses in the desired bearing direction. The receiver digitizes the received reflected pulses using a low-temperature-grown (LTG) indium gallium arsenide (InGaAs) based photoconductive antenna (PCA) and the time-to-digital converter (TDC) and demodulates them using the DS-OCDMA. When all of the reflected waves corresponding to the pixels forming a range image are received, the proposed LIDAR generates a point cloud based on the time-of-flight (ToF) of each reflected wave. The results of simulations performed on the proposed LIDAR are compared with simulations of existing LIDARs. (C) 2016 Optical Society of America
Keyword:
PHOTOCONDUCTIVE TERAHERTZ OPTOELECTRONICS
TO-DIGITAL CONVERTER
DESIGN
REFLECTANCE
CMOS
CALIBRATION
WAVE
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.3
论文数:
6.1W
被引数:
14.3W
机构
引用论文
Design and characterization of a 256x64-pixel single-photon imager in CMOS for a MEMS-based laser scanning time-of-flight sensor
OPTICS EXPRESS
IF3.3
All-optoelectronic terahertz system using low-temperature-grown InGaAs photomixers
OPTICS EXPRESS
IF3.3
Terahertz line detection by a microlens array coupled photoconductive antenna array
OPTICS EXPRESS
IF3.3

