.png){kind=icon}
返回
Liquid bridge microstereolithography
.png){kind=icon}
OA
AI
DOI：10.1016/j.addma.2018.02.012.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Microstereolithography (MSL) has been employed to create 3D microstructures for a wide range of applications. Despite the many advantages of using this process, there are still several drawbacks such as the need to use a large amount of a material compared to the volume of the microstructure to be built, oxygen inhibition, and difficulty in processing highly viscous photopolymers. To minimize the amount of material required, the use of a liquid bridge has been suggested as a modification to the existing microstereolithography process. A liquid bridge can be easily found in nature after a rainfall. Basically, a bridge can be formed between two solid bodies, where surface tension can sustain a liquid bridge against a gravitational force, which tends to destroy it. With this natural phenomenon, a photopolymer can be intentionally formed between two substrates: a transparent substrate with a low surface energy can be used as a top substrate, while another substrate with a higher surface energy can be used to hold the fabricated structure together. This process, called liquid bridge microstereolithography (LBMSL), is advantageous since it uses a relatively small amount of a material, removes oxygen inhibition due to the constraint of the material surface, and offers the possibility of utilizing a highly viscous material. In this study, a mathematical model was taken to simulate a liquid bridge with a certain volume and height. Adhesion tests were accomplished to ensure the fabricated layer detaches from the top substrate while the fabricated structure remains attached to the bottom structure. Photopolymers with different viscosities were employed in LBMSL, and the results were compared with those in the traditional MSL. Finally, various 3D microstructures were fabricated by LBMSL; these fabricated microstructures provide compelling evidence that LBMSL is advantageous over the existing process for MSL.
Keyword:
Microstereolithography
Stereolithography
Liquid bridge
Photopolymerization
Surface tension
Additive manufacturing
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
11.1
论文数:
4.6K
被引数:
4.9W
机构
引用论文
分享收藏Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds.png)
BIOMATERIALS
BIOMATERIALSIF12.9
PREAI
分享收藏Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays基于聚 (富马酸丙二醇酯) 的载药微针阵列的微立体光刻和表征
PREAI
分享收藏
查看更多内容