返回
LLZO solid electrolyte fabrication explained: A tutorial
DOI:10.1557/s43577-026-01218-4.png)
摘要
En 中文
锂镧锆氧化物(LLZO)是一种有前景的锂离子电池固态电解质,因其石榴石结构的高离子电导率和化学/电化学稳定性。本工作的目的是为研究人员提供制备功能性LLZO片材的介绍和操作指南,使其离子电导率达到~0.5–1 mS/cm,并能够循环锂金属电极。通过综述多篇文献以确定LLZO合成和片材制备的最佳参数。同时讨论了生产后评价片材质量的常用方法。除传播现有文献外,本文报告了制备可重复LLZO片材的必要步骤,包括文献中常被忽视或遗漏的细节。本教程旨在作为制备可重复LLZO片材的指南,识别测试LLZO片材时的常见错误,并通过减少石榴石研究的启动时间,促进固态电解质领域的更快发展。
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
5.3K
被引数:
1.1W
机构
引用论文
Toward a Fundamental Understanding of the Lithium Metal Anode in Solid-State Batteries-An Electrochemo-Mechanical Study on the Garnet-Type Solid Electrolyte Li6.25Al0.25La3Zr3O12对固态电池中锂金属阳极的基本理解-石榴石型固体电解质Li6.25Al0.25La3Zr3O12的电化学机械研究
Influence of sintering atmosphere on the phase, microstructure, and lithium-ion conductivity of the Al-doped Li7La3Zr2O12 solid electrolyte烧结气氛对Al掺杂的Li7La3Zr2O12固体电解质的相,微观结构和锂离子电导率的影响
A general method to synthesize and sinter bulk ceramics in seconds一种在几秒钟内合成和烧结块状陶瓷的通用方法
Science
IF45.8
Effect of Sintering Additives on Relative Density and Li-ion Conductivity of Nb-Doped Li7La3ZrO12 Solid Electrolyte烧结助剂对Nb掺杂Li7La3ZrO12固体电解质相对密度和锂离子电导率的影响
Temperature dependent flux balance of the Li/Li7La3Zr2O12 interfaceLi/Li7La3Zr2O12界面的温度相关通量平衡
ELECTROCHIMICA ACTA
IF5.6
Densification of Ta-Doped Garnet-Type Li6.75La3Zr1.75Ta0.25O12 Solid Electrolyte Materials by Sintering in a Lithium-Rich Air Atmosphere通过在富锂空气气氛中烧结来致密化掺Ta的石榴石型Li6.75La3Zr1.75Ta0.25O12固体电解质材料
Synthesis and high Li-ion conductivity of Ga-stabilized cubic Li7La3Zr2O12Ga稳定的立方Li7La3Zr2O12的合成和高锂离子电导率
Growth Process and Removal of Interface Contaminants for Garnet-Based Solid-State Lithium Metal Batteries石榴石基固态锂金属电池的生长过程及界面污染物的去除
Critical Current Density Limitation of LLZO Solid Electrolyte: Microstructure vs InterfaceLLZO固体电解质的临界电流密度限制: 微观结构与界面

