.png){kind=icon}
返回
Machine learning based layer roughness modeling in robotic additive manufacturing
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jmapro.2021.08.056.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Wire Arc Additive Manufacturing (WAAM) is a manufacturing technique that deposits metal layer upon layer to manufacture 3D parts based on welding processes. Most researchers considered weld bead width, height, and penetration as the characteristic performance in WAAM. However, layer roughness is also important because it affects the machining cost and mechanical properties of fabricated parts. If the roughness of a deposited layer can be reduced, less machining will be required, and material wastage will be reduced. Reduced layer roughness will also enable better bonding between adjacent layers. Hence, the deposition of weld beads with minimized roughness demands great attention. A few researchers who tried to investigate roughness in WAAM used straight paths for material deposition, but the investigation of the weaving path, which has a great potential to reduce layer roughness, has not been investigated well. The main contribution of this paper is about successfully implementing two machine learning methods to accurately model surface roughness in WAAM using a weaving path: Random Forest and Multilayer Perceptron (MLP) which is also known as Artificial Neural Network (ANN). Both methods are effective for modeling and predicting the layer roughness for a given set of robotic WAAM parameters, but Random Forest gave better results than MLP in terms of accuracy and computational time.
Keyword:
Random Forest
Multilayer Perceptron
Machine learning
Weaving path
Surface roughness
Wire Arc Additive Manufacturing (WAAM)
Laser scanning
Industrial robot
期刊
IF:
6.8
论文数:
8.0K
被引数:
3.5W
机构
引用论文
Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing单珠多层零件的视觉传感和珠宽度控制: 基于GMAW的快速制造中的材料和能源节省
PREAI
分享收藏Allogenic hematopoietic stem cell transplantation in two siblings with adult metachromatic leukodystrophy and a systematic literature review.png)
JIMD Reports
OAAI
JIMD ReportsIF0
OAAI分享收藏Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V研究等离子体沉积对Ti-6Al-4V增材层制造的好处
OAAI
OAAI分享收藏Machine learning of weld joint penetration from weld pool surface using support vector regression
PREAI
分享收藏
查看更多内容