.png){kind=icon}
返回
Material Characterization Using Complementary Split-Ring Resonators
.png){kind=icon}
PRE
AI
DOI：10.1109/TIM.2012.2203450.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A microwave method based on complementary split-ring resonators (CSRRs) is proposed for dielectric characterization of planar materials. The technique presents advantages such as high measurement sensitivity and eliminates the extensive sample preparation procedure needed in resonance-based methods. A sensor in the shape of CSRRs working at a 0.8-1.3 GHz band is demonstrated. The sensor is etched in the ground plane of a microstrip line to effectively create a stopband filter. The frequencies at which minimum transmission and minimum reflection are observed depend on the permittivity of the sample under test. The minimum transmission frequency shifts from 1.3 to 0.8 GHz as the sample permittivity changes from 1 to 10. The structure is fabricated using printed circuit board technology. Numerical findings are experimentally verified.
Keyword:
Complementary split-ring resonators (CSRRs)
material characterization
near-field sensors
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.9
论文数:
2.0W
被引数:
5.8W
机构
引用论文
Plate‐related complication and health‐related quality of life after mandibular reconstruction by fibula flap with reconstruction plate or miniplate versus anterolateral thigh flap with reconstruction plate.png)
Microsurgery
MicrosurgeryIF0
PREAI
分享收藏
分享收藏
查看更多内容