.png){kind=icon}
返回
Maximizing volumetric efficiency using stochastic optimization techniques for internal combustion engines
.png){kind=icon}
PRE
AI
DOI：10.1016/j.applthermaleng.2021.117603.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The volumetric efficiency of internal combustion engines quantifies the effectiveness of the admission process, whereas the thermal efficiency quantifies the amount of work generated based on the total energy released by the fuel. A method to optimize these efficiencies is by changing the valve timing. In this study, the parallelized particle swarm optimization method is implemented to maximize the volumetric efficiency, and its performance is compared with the differential evolution method. Calculations are performed using a parallelized computational code comprising a one-dimensional model for unsteady compressible gas flow in the intake and exhaust ducts, a single-zone combustion model for the in-cylinder process, and optimization routines based on particle swarm optimization and differential evolution techniques. In both optimizations, the design variables are the opening and closing angles of the intake and exhaust valves. Both optimization methods reach the same maximum volumetric efficiency, but the particle swarm optimization presents a smaller deviation from the mean values and better performance in terms of computational time. In addition, a higher volumetric efficiency is associated with higher values of the exhaust valve opening angle and intake valve closing angle at speeds of 2000 and 3000 rpm, respectively. Finally, it can be concluded that both optimization methods can optimize the volumetric efficiency and reach the same maximum value; however, the particle swarm optimization performs better in terms of the computational time and exhibits fewer deviations from the mean values.
Keyword:
Volumetric efficiency
Thermal efficiency
Valve timing
Optimization
Internal combustion engines
期刊
IF:
6.9
论文数:
2.8W
被引数:
10.6W
机构
引用论文
Numerical simulation on effects of spray angle in a swirl chamber combustion system of DI (direct injection) diesel engines.png)
ENERGY
ENERGYIF9.4
PREAI
分享收藏Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engineAPPLIED ENERGY
APPLIED ENERGYIF11
PREAI
分享收藏Multi-objective optimization of internal combustion engine by means of 1D fluid-dynamic modelsAPPLIED ENERGY
APPLIED ENERGYIF11
PREAI
分享收藏Analysis the optimum inlet air temperature for controlling homogeneous charge compression ignition (HCCI) engine均质压燃 (HCCI) 发动机最佳进气温度控制分析
OAAI
OAAI分享收藏
查看更多内容