Metamodel-Based Numerical Techniques for Self-Optimizing Control

doi:10.1021/acs.iecr.8b04337

2018-11-16

PRE

Victor Alves

F. S. Lima

Sidinei K. Silva

Antônio Carlos Brandão de Araújo *

DOI：10.1021/acs.iecr.8b04337

原文链接

原文求助

摘要

En 中文

Self-optimizing control technologies are a well-known study field of control structure design, having a robust mathematical background. With the aid of commercial process simulators and numerical packages, process modeling became an easier task. However, dealing with extremely large and complex systems still is a tedious task, and sometimes not feasible, even with these innovative tools. Surrogate models, also called metamodels, can be used to substitute partially or totally the original mathematical models for prediction and optimization purposes, reducing the complexity of evaluating large-scale and highly nonlinear processes. This work aims at applying recent self-optimizing control techniques to surface responses of processes using the Kriging method as a reduced model builder. A procedure to apply self-optimizing control to surrogate responses was described in detail, together with how the optimization can be done. Well-known case studies had their surface responses successfully built and analyzed to generate using the techniques cited, the optimal selection of controlled variables that minimizes the worst-case loss, and the same results were found when compared with the implementation in the original models from previous authors. The results indicate the effectiveness of the reduced models when applied to design self-optimizing control structures, simplifying the task.

Keyword:

CONTROL-STRUCTURE DESIGN

OPTIMAL MEASUREMENT COMBINATIONS

SIMPLE REFRIGERATION CYCLES

OPTIMAL OPERATION

PLANTWIDE CONTROL

CONTROLLED VARIABLES

GLOBAL OPTIMIZATION

SURROGATE MODELS

SINGULAR-VALUE

PART I