.png){kind=icon}
返回
Micro-accelerometer Based on Vertically Movable Gate Field Effect Transistor
.png){kind=icon}
OA
AI
DOI：10.1007/s40820-015-0041-9.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A vertically movable gate field effect transistor (VMGFET) is proposed and demonstrated for a micro-accelerometer application. The VMGFET using air gap as an insulator layer allows the gate to move on the substrate vertically by external forces. Finite element analysis is used to simulate mechanical behaviors of the designed structure. For the simulation, the ground acceleration spectrum of the 1952 Kern County Earthquake is employed to investigate the structural integrity of the sensor in vibration. Based on the simulation, a prototype VMGFET accelerometer is fabricated from silicon on insulator wafer. According to current-voltage characteristics of the prototype VMGFET, the threshold voltage is measured to be 2.32 V, which determines the effective charge density and the mutual transconductance of 1.545 x 10(-8) C cm(-2) and 6.59 mA V-1, respectively. The device sensitivity is 9.36-9.42 mV g(-1) in the low frequency, and the first natural frequency is found to be 1230 Hz. The profile smoothness of the sensed signal is in 3 dB range up to 1 kHz.
Keyword:
MEMS
Micro-accelerometer
Suspended gate FET
Vertically movable gate FET
VMGFET
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
36.3
论文数:
2.6K
被引数:
3.6W
机构
引用论文
.png){kind=icon}
分享收藏
查看更多内容