.png){kind=icon}
返回
Microphone-Based Vibration Sensor for UGS Applications
.png){kind=icon}
PRE
AI
DOI：10.1109/TIE.2017.2682015.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
To be an ideal candidate, seismic sensor for wireless unattended ground sensor (UGSs) applications should have lightweight, low noise, high sensitivity, and energy efficiency. Typically, to cover regions far from source, the best choice will be the coil-over-magnet geophone. Because it is usually heavier than batteries, a lighter one should replace it to further cut the weight of sensor nodes. However, currently available seismic sensors, such as micro-electro mechanical systems (MEMS) accelerometers and molecular-electronic transducers, cannot do the job since they usually consume too much energy to achieve low noise level as well as high sensitivity. This work has designed and tested a new kind of vibration sensor, the vibration-to-sound geophone, which can convert seismic waves into sound physically that can then be detected by an MEMS microphone. By using a battery as its proof mass, the vibration-to-sound geophone 1) has better sensibility than the coil-over-magnet geophone from 20 to 500 Hz and is about 58 times more sensitive at 70 Hz which is more than 60 dBV/m; 2) is very light, half the weight of the coil one; and 3) consumes no more than 726 mu W which is more energy-efficient than MEMS accelerometers and molecular-electronic transducers.
Keyword:
Microphone
seismic sensor
sound
unattended ground sensor (UGS)
vibration
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.2
论文数:
1.8W
被引数:
9.8W
机构
引用论文
Recognition of moving ground targets by measuring and processing seismic signal.png)
MEASUREMENT
MEASUREMENTIF5.6
PREAI
分享收藏分享收藏Seismic Target Classification Using a Wavelet Packet Manifold in Unattended Ground Sensors SystemsSENSORS
OAAI
SENSORSIF3.5
OAAI分享收藏
分享收藏
查看更多内容