返回
Minimizing membrane bioreactor environmental footprint by multiple objective optimization
DOI:10.1016/j.biortech.2020.122824.png)
摘要
En 中文
This paper presents a modelling study aimed at minimizing the environmental foot print of a membrane bioreactor (MBR) for wastewater treatment. Specifically, an integrated model for MBR was employed in view of the management optimization of an MBR biological nutrient removal (BNR) pilot plant in terms of operational costs and direct greenhouse gases emissions. The influence of the operational parameters (OPs) on performance indicators (PIs) was investigated by adopting the Extended-FAST sensitivity analysis method. Further, a multi-objective analysis was performed by applying the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The results show-up that the sludge retention time is the OP mostly affecting all the investigated PIs. By applying the set of optimal OPs, there was a reduction of 48% and 10% of the operational costs and direct emissions, respectively.
Keyword:
Mathematical modelling optimization
Multi-objective analysis
Wastewater treatment plant
Greenhouse gases
Membrane fouling
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9
论文数:
3.3W
被引数:
17.3W
机构
引用论文
A two pathway model for N2O emissions by ammonium oxidizing bacteria supported by the NO/N2O variationNO/N2O变化支持的氨氧化细菌排放N2O的两种途径模型
WATER RESEARCH
IF12.4
Multi-objective optimisation of wastewater treatment plant control to reduce greenhouse gas emissions污水处理厂控制的多目标优化以减少温室气体排放
WATER RESEARCH
IF12.4
BSM-MBR: A benchmark simulation model to compare control and operational strategies for membrane bioreactors
WATER RESEARCH
IF12.4

