.png){kind=icon}
返回
Modelling flow-induced microstructural segregation in semi-solid metals
.png){kind=icon}
OA
AI
DOI：10.1016/j.matdes.2021.110364.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Lightweight alloys produced by pressurized castings suffer from flow-induced microstructural segregation due to the migration of externally solidified crystals (ESCs). Although some qualitative research has been carried out on ESCs migration, quantitative prediction of it is still demanded. In this respect, an ESCs migration model based on hydrodynamics and the rheological behaviour of semi-solid metals (SSMs) is proposed to estimate flow-induced microstructural segregation. By employing the model, a plug flow region having a decisive influence on ESCs migration is observed according to the flow simulation of yield-pseudoplastic SSMs. Good agreement between the experimental data and the simulation results is obtained, suggesting that such flow-induced microstructural segregation is controllable by manipulating process parameters such as solid fraction, cavity size and filling velocity. A real-time in situ synchrotron X-ray radiography experiment is carried out to reveal the nature of ESCs migration and provide evidence for the hypothesized flow-induced ESCs migration mechanism. A semi-empirical solid fraction-related rheological (SFR) model capable of relating rheological parameters with solid fraction of SSMs is also proposed, enabling the optimization of process parameters. (c) 2021 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).
Keyword:
Segregation
Modelling
X-ray synchrotron radiation
Semi-solid metal
Rheology
ESC migration
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
7.9
论文数:
1.9W
被引数:
9.8W
机构
引用论文
Low shear rate behavior at high solid fractions of partially solidified Al-8 wt.% Cu alloys.png)
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏On the probabilistic nature of high-pressure die castingMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGOAAI
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
OAAI分享收藏
查看更多内容