返回
Modified Indirect Vector Control Technique for Current-Source Induction Motor Drive
DOI:10.1109/TIA.2012.2227132.png)
摘要
En 中文
Medium-voltage (MV) drives are generally based on either voltage-source inverters or current-source inverters (CSIs). CSIs feature simple topology, motor-friendly waveforms, power reversal capability, and short-circuit-proof protection; hence, they are widely used as high-power MV drives. Direct vector control (DVC) CSI drives ensure improved performance by decoupled control of the machine flux and torque using two independent control loops. Despite the excellent performance of DVC, this scheme faces practical challenges, like dc offset in the stator model and machine parameter dependence. Conventional indirect vector control (IVC) CSI drives are known for reduced computational burden and less machine dependence. However, conventional-IVC CSI drives exhibit poor dynamic response and transient field misorientation due to the absence of a dedicated flux control loop. In this paper, a modified IVC technique is proposed featuring superior decoupling and field orientation using only two extra proportional-integral current controllers with additional motor current feedback signals. The proposed-technique effectiveness is examined experimentally, on a scaled low-voltage prototype, as well as using simulation results.
Keyword:
Current-source inverter (CSI)
field orientation
indirect vector control (IVC)
medium-voltage (MV) drives
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.5
论文数:
1.1W
被引数:
3.5W
机构
引用论文
On the efficiency of voltage source and current source inverters for high.-power drives关于高功率驱动器的电压源和电流源逆变器的效率
A vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method采用新型定子电流控制方法的矢量控制PWM电流源逆变器感应电动机驱动器

