.png){kind=icon}
返回
Modular pavements: Developing high performance concrete
.png){kind=icon}
PRE
AI
DOI：10.1016/j.conbuildmat.2021.123362.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The main objective of this research is to develop high-strength concrete mixture (compressive strength >= 41 MPa) that is resistant to fatigue and suitable to produce slabs for modular pavements also known as precast concrete pavements. In addition to this, other characteristics (compressive strength, flexural strength and indirect tensile strength) were determined as well and the effect of fibers depending on type and amount in the presence and absence of silica fume has been revealed. Silica fume (0% and 7% by cement mass) and three types of fibers (one type of steel fibers and two types of polypropylene fibers) with three different amount of each fiber type were used to produce concrete mixtures. At all, 20 concrete mixtures were produced and tested in terms of static and cyclic bending, static compression and static tension. The research showed that the use of both fibers and silica fume in the concrete mixture leads to the best performance and steel fibers are superior to polypropylene fibers. Concrete mixture with 49.5 kg/m(3) of steel fibers and 7% of silica fume by cement mass had compressive strength of 61 MPa and the highest resistance to fatigue and thus is the most potential to produce slabs for modular pavements. (C) 2021 Elsevier Ltd. All rights reserved.
Keyword:
Cement concrete
Concrete
Concrete pavement
Pavement structure
Modular pavement
Fiber
Flexural strength
Silica fume
Concrete resistant to fatigue
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
8
论文数:
4.5W
被引数:
27.9W
机构
引用论文
An overview of the flexural post-cracking behavior of steel fiber reinforced concrete.png)
STRUCTURAL CONCRETE
STRUCTURAL CONCRETEIF3.3
PREAI
分享收藏
查看更多内容