.png){kind=icon}
返回
Multi-functionalized full-interface integrated engineering towards highly reversible Li-rich Mn-based cathode
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ensm.2024.103241.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Li-rich Mn-based materials (LRMs) with high energy density are promising cathode candidates for next-generation lithium-ion batteries. However, the inevitable oxygen release and electrolyte decomposition would stimulate successive interface side reactions and structure degradation, leading to rapid capacity decay. In addition, the terrible reaction kinetics of LRMs is not conducive to rate capability and low-temperature performance. Herein, a multi-functionalized full-interface integrated engineering is put forward to introduce multifunctional modification layer (including surface S, N co-doped carbon layer, near-surface gradient oxygen vacancies and the resultantly induced atomic rearrangement) at the interface of both the secondary particles and inner primary particles of LRMs. The oxygen vacancies and induced intralayer Li/Mn disorder can suppress the oxygen release. And the induced lattice-matched rock-salt phase can improve the interface structure stability. Meanwhile, the S, N co-doped carbon layer can isolate LRMs and electrolyte, alleviating the decomposition of electrolyte and the resulting structural damage to LRMs. In addition, Li+ diffusion kinetic and electric conductivity are enhanced due to oxygen vacancies and S, N co-doped carbon layer. Thus, a reliable LiF-rich cathode electrolyte interphase (CEI) film is formed, which can further reduce the interfacial side reactions upon cycling, ultimately enhancing the comprehensive electrochemical performance of LRMs. Specifically, the modified sample (HLRM) exhibits enhanced long-term cycle stability, with capacity retention of 94.8 % and 86.6 % after 100 cycles at 0.2 C and 500 cycles at 1 C, respectively. In addition, HLRM delivers elevated specific capacity and cyclic stability both at high (55 degrees C) and low (-15 degrees C) temperature. This work offers a new idea to improve the comprehensive electrochemical performance of LRMs by multi-functionalized full-interface integrated modification engineering.
Keyword:
Li-rich Mn-based cathode
Surface atomic rearrangement
Oxygen vacancy
Full -interface modification
Cycling stability
期刊
IF:
20.2
论文数:
5.7K
被引数:
6.3W
机构
引用论文
An Ultra-Long-Life Lithium-Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three-in-One Surface Modification for Lithium-Ion Batteries用于锂离子电池的三合一表面改性的超长寿命富锂Li1.2Mn0.6Ni0.2O2阴极
PREAI
分享收藏New Organic Complex for Lithium Layered Oxide Modification: Ultrathin Coating, High-Voltage, and Safety Performances用于锂层状氧化物修饰的新型有机配合物: 超薄涂层，高电压和安全性能.png)
ACS ENERGY LETTERS
ACS ENERGY LETTERSIF18.2
PREAI
分享收藏Dislocation and oxygen-release driven delithiation in Li2MnO3Li2MnO3中的位错和氧释放驱动的脱锂NATURE COMMUNICATIONS
OAAI
NATURE COMMUNICATIONSIF15.7
OAAI分享收藏Critical Barriers to Successful Implementation of Earth-Abundant, Mn-Rich Cathodes for Vehicle Applications and Beyond: A Detailed Study of Low SOC Impedance成功实施用于车辆及其他应用的地球丰富，富含锰的阴极的关键障碍: 低SOC阻抗的详细研究
OAAI
OAAI分享收藏In Situ Surface Self-Reconstruction Strategies in Li-Rich Mn-Based Layered Cathodes for Energy-Dense Li-Ion Batteries用于能量密度锂离子电池的富锂锰基层状阴极中的原位表面自重建策略
PREAI
分享收藏A Universal Strategy toward the Precise Regulation of Initial Coulombic Efficiency of Li-Rich Mn-Based Cathode Materials精确调节富锂锰基正极材料初始库仑效率的通用策略ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏Revealing the Thermodynamics and Kinetics of In-Plane Disordered Li2MnO3 Structure in Li-Rich Cathodes揭示富锂阴极中面内无序Li2MnO3结构的热力学和动力学ACS ENERGY LETTERS
ACS ENERGY LETTERSIF18.2
PREAI
分享收藏A High-Performance Li-Mn-O Li-rich Cathode Material with Rhombohedral Symmetry via Intralayer Li/Mn Disordering通过层内Li/Mn无序具有菱形对称的高性能li-mn-o富Li阴极材料ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏
查看更多内容