返回
Multi-phase-field simulations for dynamic recrystallization
DOI:10.1016/j.commatsci.2008.12.009.png)
摘要
En 中文
A dynamic recrystallization multi-phase-field (MPF-DRX) model that can approximately take into account grain deformation during dynamic recrystallization (DRX) has been developed, where the grain deformation was introduced by changing the size of a finite difference grid so as to keep the volume constant. The accuracy of the developed model was confirmed by simulating a single DRX grain growth. As a result of MPF-DRX simulations with grain deformation, it was clarified that, from microstructure evolutions, the appropriate deformation during DRX can be reproduced by the developed model. However, it was also concluded that the macroscopic stress-strain relationship and variations in grain size are not affected by the grain deformation introduced here. Furthermore, the DRX cycle was defined and the relationship between the DRX cycle fraction and the stress-strain curve was discussed. As a result, it was concluded that the stress-strain curve with multiple peaks is observed when the strain at the first valley of the stress-strain curve is smaller than that corresponding to the maximum first DRX cycle fraction. (C) 2008 Elsevier B.V. All rights reserved.
Keyword:
Dynamic recrystallization
Multi-phase-field method
Grain deformation
DRX cycle
Multiscale simulation
期刊
IF:
3.3
论文数:
1.3W
被引数:
3.6W
机构
引用论文
Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization动态再结晶过程微观组织演化与塑性流动耦合定量模拟
ACTA MATERIALIA
IF9.3
Rapid confirmation and revision of the primary structure of bovine serum albumin by ESIMS and frit-FAB LC/MS通过ESIMS和frit-fab LC/MS快速确认和修订牛血清白蛋白的一级结构

