返回
Multifunctional ultra-lightweight engineered cementitious composites (ECC) for electromagnetic interference shielding
DOI:10.1016/j.jobe.2024.111409.png)
摘要
En 中文
This study developed the multifunctional ultra-lightweight engineered cementitious composite (ULW-ECC) by integrating conductive fillers to achieve effective electromagnetic interference (EMI) shielding capabilities, outstanding mechanical properties and thermal insulation. The mechanical performance, electrical conductivity, EMI shielding effectiveness (SE), and microstructure were analysed. Initially, the effects of the carbon fibre (CF) content and the pre-heating temperature of CF on EMI SE of the matrix (named: ULW-CC) without polyethylene (PE) fibre were tested. Then, CFs (0.5 and 1.0 vol%) with seven lengths (1-20 mm) were respectively incorporated into ULW-ECC to study EMI SE. The EMI SE of ULW-ECC incorporating powder calcined petroleum coke (CPC) was compared with that of CF. Experimental results demonstrated that the incorporation of conductive fillers improved the strength, conductivity, and EMI SE. Both the conductivity and EMI SE of ULW-CC and ULW-ECC increased with the dosage of conductive filler. EMI SE was enhanced with increased electrical conductivity, and pre-heating CF at 300 degrees C further improved the EMI SE. In ULW-ECC, 9-mm CF showed the highest EMI SE and conductivity. The conductivity and EMI SE of ULW-ECC were lower than those of ULW-CC at the same CF dosage due to the negative impact of PE fibre dispersion on the conductive network of CFs. The mixing method of CF in ULW-ECC affected the EMI SE. The EMI SE of ULW-ECC incorporating powder CPC was much lower than that incorporating CF, but hybridization of CPC and CF significantly enhanced EMI SE.
Keyword:
Ultra-lightweight engineered cementitious
composites
Electromagnetic interference shielding
Carbon fibre
Calcined petroleum coke
Length and content
期刊
IF:
7.4
论文数:
1.7W
被引数:
6.6W
机构
引用论文
Electromagnetic shielding properties of cementitious composites containing carbon nanofibers, zinc oxide, and activated carbon powder含碳纳米纤维,氧化锌和活性炭粉的水泥基复合材料的电磁屏蔽性能
Sustainable and cost-effective ultra-lightweight engineered cementitious composite: Design and material characterization可持续和具有成本效益的超轻工程水泥基复合材料: 设计和材料表征
Electromagnetic wave absorption enhancement of carbon black/gypsum based composites filled with expanded perlite膨胀珍珠岩填充炭黑/石膏基复合材料的电磁波吸收增强
Investigation of the Electro-Mechanical Behavior of Hybrid Polyaniline/Graphene Nanocomposites Fabricated by Dynamic Interfacial Inverse Emulsion Polymerization
Graphene
IF0
Electromagnetic interference shielding mechanisms of CNT/polymer composites碳纳米管/聚合物复合材料的电磁干扰屏蔽机制
CARBON
IF11.6

