.png){kind=icon}
返回
Multimode Polymer Waveguide Components for Complex On-Board Optical Topologies
.png){kind=icon}
PRE
AI
DOI：10.1109/JLT.2013.2278382.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Multimode polymer waveguides are an attractive transmission medium for board-level optical links as they provide high bandwidth, relaxed alignment tolerances, and can be directly integrated onto conventional printed circuit boards. However, the performance of multimode waveguide components depends on the launch conditions at the component input, complicating their use in topologies that require the concatenation of multiple multimode components. This paper presents key polymer components for a multichannel optical bus and reports their performance under different launch conditions, enabling useful rules that can be used to design complex interconnection topologies to be derived. The components studied are multimode signal splitters and combiners, 90 degrees-crossings, S-bends, and 90 degrees-bends. By varying the width of the splitter arms, a splitting ratio between 1% and 95% is achieved from the 1 x 2 splitters, while low-loss signal combining is demonstrated with the waveguide combiners. It is shown that a 3 dB improvement in the combiner excess loss can be achieved by increasing the bus width by 50 mu m. The worst-case insertion loss of 50 x 100 mu m waveguide crossings is measured to be 0.1 dB/crossing. An empirical method is proposed and used to estimate the insertion losses of on-board optical paths of a polymeric four-channel optical bus module. Good agreement is achieved between the predicted and measured values. Although the components and empirical method have been tailored for use in a multichannel optical bus architecture, they can be used for any on-board optical interconnection topology.
Keyword:
Optical interconnections
optical polymer
optical waveguides
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.8
论文数:
1.7W
被引数:
3.8W
机构
引用论文
Reliability of widely-tunable SGDBR lasers suitable for deployment in agile networks适用于敏捷网络部署的宽带可调谐SGDBR激光器的可靠性
PREAI
分享收藏Regenerative polymeric bus architecture for board-level optical interconnects.png)
OPTICS EXPRESS
OAAI
OPTICS EXPRESSIF3.3
OAAI分享收藏
Halide-induced adsorption of lead(II) and cadmium(II) from concentrated electrolyte solutions卤化物诱导的铅(II)和镉(II)在浓电解质溶液中的吸附
PREAI
分享收藏Power comparison between high-speed electrical and optical interconnects for interchip communication
PREAI
分享收藏
查看更多内容