.png){kind=icon}
.png){kind=icon}
Return
Multiple Reference Frame-Based Torque Ripple Reduction in DFIG-DC System
.png){kind=icon}
PRE
AI
DOI：10.1109/TPEL.2019.2941957.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
In this article, a multiple reference frame (MRF)-based approach is proposed to mitigate the torque ripple of the DFIG-dc system. The DFIG-dc system uses a diode bridge rectifier between the stator winding of DFIG and dc link. A reduced-power three-phase pulsewidth modulation converter is connected between the rotor winding of DFIG and dc link. Due to the diode commutation, the stator current and stator flux linkage are distorted with harmonics. To reduce the resulting torque ripple, the rotor currents need to track a pulsating reference signal to compensate the distortion of the stator flux. To improve the current tracking performance, MRF-based estimators are used to calculate the main harmonics in both the command value and actual value of the rotor current. Then, an MRF-based regulator is implemented to achieve an accurate tracking for the harmonics of the rotor current command. Both simulation and experimental results demonstrate the effectiveness of the proposed scheme in reducing the torque ripple. The robustness of the proposed algorithm against deviation of stator frequency is also supported by the simulation and experimental results.
Keywords:
DC link
doubly fed induction generator (DFIG)
multiple reference frame
torque ripple mitigation
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
6.5
Papers:
1.7W
Citations:
8.3W