.png){kind=icon}
返回
Multiple-view 3D digital image correlation based on pseudo-overlapped imaging
.png){kind=icon}
PRE
AI
DOI：10.1364/OL.529123.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The restriction of the field of view (FOV) enlargement and spatial resolution increase during optical monitoring was investigated. Traditional optical instruments usually have a fixed FOV in one test; thus, they have low accuracy for small samples under large motions/deformations. To improve the spatial resolution in a relatively large FOV of an optical instrument, a multiple-view 3D digital image correlation (3D-DIC) method based on pseudo-overlapped imaging is proposed. Using a set of optical components, pseudo-overlapped imaging can image two FOVs with the same camera, which converts one pair of cameras to four virtual cameras. Each virtual camera has the same whole pixels. Therefore, compared with the conventional 3D-DIC system, the proposed method simultaneously enlarges FOVs and increases spatial resolutions by two times. The efficiency, accuracy, and feasibility of the technique were validated through experiments. (c) 2024 Optica Publishing Group. All rights, including for text and data mining (TDM), Artificial Intelligence (AI) training, and similar technologies, are reserved.
Keyword:
DEFORMATION
METHODOLOGY
SYSTEM
SHAPE
期刊
IF:
3.3
论文数:
4.0W
被引数:
7.6W
机构
暂无机构信息
引用论文
On the use of a four-cameras stereovision system to characterize large 3D deformation in elastomers
OAAI
OAAI分享收藏Full-field 3D measurement using multi-camera digital image correlation system使用多相机数字图像相关系统进行全场3D测量
PREAI
分享收藏Digital image correlation based on the pre-deformation assist strategy and an optimized checkerboard-like speckle pattern for large deformation measurement.png)
OPTICS LETTERS
OPTICS LETTERSIF3.3
PREAI
分享收藏
查看更多内容