返回
Multiscale methodology for microbial fuel cell performance analysis
DOI:10.1016/j.ijhydene.2020.04.057.png)
摘要
En 中文
Microbial Fuel Cells (MFCs) are bio-electrochemical devices that directly convert organic substrates into electrical energy, by exploiting micro-organism metabolism at the electrodes. Such a technology has been shown to be promising in dealing with the waste management issue. In fact, by means of these systems, the waste disposal issue may be turned into an economic opportunity. In this work, we develop a three-dimensional numerical model grounded on the lattice Boltzmann method (LBM) to analyze the electrochemical performance of MFCs. Despite a simplified, yet effective, modeling of the electrochemical mechanisms driving the motion of ions inside the reactor, the proposed computational approach is capable of accurately capture the main involved physical phenomena and provide a fair estimation of the ion distribution within the batch reactor. The numerical predictions are then compared with available experimental data for a similar layout of solid-waste MFCs. Despite some differences in the prediction of the concentration-loss phase, which is not clearly observable in the experiments, the results obtained by the proposed methodology show that either power and polarization curves reflect the general trends of MFCs operation. This highlights the significant potential of the present computational approach for the accurate evaluation of MFC performance. (c) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Keyword:
Microbial fuel cells
Waste management
Environmental systems
Sustainability
Lattice Boltmann method
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
8.3
论文数:
5.5W
被引数:
23.1W
机构
引用论文
High strength wastewater treatment accompanied by power generation using air cathode microbial fuel cell空气阴极微生物燃料电池处理高强度废水并伴随发电
APPLIED ENERGY
IF11
Recent advances in the use of different substrates in microbial fuel cells toward wastewater treatment and simultaneous energy recovery
APPLIED ENERGY
IF11

