.png){kind=icon}
返回
New FT accelerometer based on surface micromachining
.png){kind=icon}
PRE
AI
DOI：10.1016/S0924-4247(97)80285-3.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A new accelerometer based on an FET sensing element and surface-micromachining technology has been designed and fabricated. A new process to avoid sticking during processing has been developed. In this new process, the sacrificial layer is etched before polysilicon structuring, defining a sealed vacuum cavity. Finally the accelerometer structure is defined with dry etching on this cavity, avoiding any wet etching process and, in consequence, the sticking of the polysilicon structure on the substrate. The sensing element of the accelerometer is a transistor FET. So the mass of the accelerometer acts as a gate of the transistor, changing the value of the threshold voltage, V-T, with the acceleration. Preliminary results show a high sensitivity with a much simpler readout compared to capacitive sensors.
Keyword:
accelerometers
surface micromachining
field-effect transistors (FETs)
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
1.5W
被引数:
3.3W
机构
暂无机构信息
引用论文
Prevalence and Characteristics of Anti-Indigenous Bias Among Albertan Physicians: A Cross-Sectional Survey阿尔伯塔省医生中反原住民偏见的患病率与特征：一项横断面调查
.png){kind=icon}
PREAI
分享收藏
