返回
New practical device structure for graphen-based electrochromic devices
DOI:10.1016/j.optmat.2021.111675.png)
摘要
En 中文
In this study, we fabricate a simple, low-cost, high-efficiency, and easy-to-design electrochromic device. Multi-layer graphene (MLG) samples were obtained by chemical vapor deposition method (CVD) at four different growth temperatures of 900, 950, 1000, and 1050 degrees C. Electrical and optical characterizations of MLG samples were carried out by transferring them to the polyvinyl chloride (PVC) surface by thermal lamination method. After the characterization of the samples the so called coplanar surface is produced in order to obtain an efficient electrochromic device consisting of a flexible graphene surface without an extra electrode Optical measurements show that threshold voltage for the change in the optical modulation is 2.5V in the near-infrared region and that there exists an increase of 60% just over 3V value. Also, in the electrical characterization studies, a decrease of up to approximately 50% of the layer resistance was seen.
Keyword:
Graphene
Electrochromic device
Graphene photonics
Electrochromism
期刊
IF:
4.2
论文数:
1.7W
被引数:
3.4W
机构
引用论文
Recent Advances in Flexible Electrochromic Devices: Prerequisites, Challenges, and Prospects
ENERGY TECHNOLOGY
IF3.6
Interpretation of Raman spectra of disordered and amorphous carbon无序和无定形碳的拉曼光谱解释
PHYSICAL REVIEW B
IF3.7
Fast and low voltage-driven solid-state electrochromics using 3-D conductive FTO nanobead electrodes
Roll-to-Roll Encapsulation of Metal Nanowires between Graphene and Plastic Substrate for High-Performance Flexible Transparent Electrodes用于高性能柔性透明电极的石墨烯和塑料衬底之间的金属纳米线的卷对卷封装
NANO LETTERS
IF9.1
Intercalation of Few-Layer Graphite Flakes with FeCl3: Raman Determination of Fermi Level, Layer by Layer Decoupling, and Stability用FeCl3插入几层石墨薄片: 费米能级的拉曼测定,逐层解耦和稳定性

