.png){kind=icon}
返回
Nodal beam stack vibration isolators
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ymssp.2022.109324.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper introduces additively manufactured beam networks that isolate vibration with multiple broad bandgaps. The isolators consist of symmetric stacks of beams with tip masses connected in series via compliant hinges near nodal points. An analytical model is derived to predict the vibration behavior of a beam stack. An isolator with four beams is designed to provide a band gap of 32 Hz with a center frequency at 72 Hz. A Polylactic acid polymer prototype is 3D printed and the frequency response of input force to transmitted force is experimentally measured showing a large 41 Hz band gap with a center frequency also around 72 Hz. The experimentally validated model is used to design a 10 beam isolator with a low frequency band gap from 10 to 86 Hz, and a high frequency band gap from 202 to 543 Hz.
Keyword:
Vibration isolation
Band gap
Continuous vibrations
Beam network
期刊
IF:
8.9
论文数:
1.3W
被引数:
6.6W
机构
引用论文
分享收藏Three-dimensional resonating metamaterials for low-frequency vibration attenuation.png)
SCIENTIFIC REPORTS
OAAI
SCIENTIFIC REPORTSIF3.9
OAAI分享收藏Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analysesMATERIALS & DESIGNOAAI
MATERIALS & DESIGNIF7.9
OAAI分享收藏
查看更多内容