.png){kind=icon}
返回
Non-interference slow tool servo turning method for complex surfaces with large undulation changes
.png){kind=icon}
PRE
AI
DOI：10.1016/j.precisioneng.2024.05.019.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Complex curved surface parts are integral to the mechanical industry, demanding precise machining techniques. Multi-axis slow tool servo turning has emerged as an efficient method due to its high precision and quality. However, the challenge of severe tool flank interference arises, especially on surfaces with large undulation changes. Conventional methods, such as increasing tool clearance angles or adding extra tool axes, detrimentally affect machining precision and stability. To address this, a non-interference toolpath planning method is proposed for complex surfaces with large undulation changes. The approach begins with establishing geometric models of the single-point diamond turning tool and typical complex surfaces, followed by analyzing the mechanism and evolution of tool flank interference. By considering geometric parameters and vector relationships, the practical tool clearance angles are calculated. And then a criterion for subregion division is introduced and the non-cutting stroke is designed, accounting for the maximal acceleration of machine tool axis. Multi-pass toolpaths are generated to navigate different subregions while avoiding interference by transforming spindle rotation direction. Furthermore, a method is proposed to optimize toolpath stitching in practical machining regions, ensuring continuous and smooth transitions while maintaining machining precision and surface quality. Experimental validation, conducted on a hyperbolic paraboloid surface with large undulation changes, demonstrates a significant reduction in surface roughness (Sa) from 380.503 nm to 75.664 nm-a reduction of 80.115 %. The proposed method not only enhances machining precision and surface quality but also extends tool life and improves working conditions. This research offers vital guidance for non-interference toolpath planning in engineering practice.
Keyword:
Complex surfaces with large undulation
changes
Non-interference toolpath planning
Tool clearance angle calculation
Tool flank interference
Non -cutting stroke optimization
期刊
机构
引用论文
The effect of varying the workpiece diameter on the cutting tool clearance angle in tool-life testing在刀具寿命测试中改变工件直径对刀具间隙角的影响.png)
WEAR
WEARIF6.1
PREAI
分享收藏
查看更多内容