.png){kind=icon}
返回
Numerical study on the cyclic cold storage performance in a solid-packed bed tank
.png){kind=icon}
PRE
AI
DOI：10.1016/j.est.2024.113753.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
An efficient cyclic cold storage system plays a crucial role in improving the performance of a Liquid Air Energy Storage system. Packed bed cold storage (PBCS) systems, widely researched and employed, demonstrate thermal stability, a broad operational temperature range, and cost-effectiveness. This study developed a two-dimensional transient cyclic solid-PBCS system using a porous media thermal non-equilibrium model, which was implemented in ANSYS Fluent software. During the cold charging and discharging periods, cryogenic nitrogen and nitrogen at ambient temperature were used as working fluids to exchange heat with the solid cold storage medium in the PBCS. Temperature distributions were analyzed during the cold charging, cold discharging, and the consecutive cyclic cold charging-discharging modes. The study systematically examined the impact of mass flow rate and the number of cold storage cycle on key system performance parameters, including heat exchange capacity and cyclic cold exergy efficiency. The results indicated that mass flow rate significantly affects the number of cycles required to reach a steady-state cyclic PBCS system, with higher mass flow rates necessitating more cycles. Optimal cyclic performance of the solid PBCS can be achieved at a moderate superficial mass flow rate. At a superficial mass flow rate of 0.32 kg s(-1) m(-2), the cyclic cold charging exergy efficiency exceeds 99 % and cyclic cold discharging exergy efficiency can over 68 %. The stability of multiple consecutive cold storage cycles in the solid PBCS system is critical to the overall performance of LAES. These findings on the influence of PBCS cold storage cycles and fluid mass flow on system cyclic performance provide valuable theoretical guidance for the practical operation of PBCS cycles.
Keyword:
Liquid air energy storage
Solid-packed bed tanks
Porous media model
Cyclic cold storage
Cold exergy efficiency
期刊
IF:
9.8
论文数:
2.2W
被引数:
10.1W
机构
引用论文
Progress and prospects of thermo-mechanical energy storage-a critical review热机械储能的进展与展望 -- 综述.png)
PROGRESS IN ENERGY
OAAI
PROGRESS IN ENERGYIF9.8
OAAI分享收藏Mouse Wnt receptor gene Fzd5 is essential for yolk sac and placental angiogenesisDevelopment
DevelopmentIF0
PREAI
分享收藏分享收藏A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)潜热热能存储系统 (LHTESS) 的材料，传热和相变问题公式的综述
PREAI
分享收藏Thermodynamic study on the effect of cold and heat recovery on performance of liquid air energy storageAPPLIED ENERGY
APPLIED ENERGYIF11
PREAI
分享收藏Uses, Cost-Benefit Analysis, and Markets of Energy Storage Systems for Electric Grid Applications电网应用的储能系统的用途、成本效益分析和市场
OAAI
OAAI分享收藏
查看更多内容