返回
One-Bit SAR Imaging Based on Single-Frequency Thresholds
DOI:10.1109/TGRS.2019.2910284.png)
摘要
En 中文
This paper addresses a novel SAR imaging scheme based on 1-bit sampling assisted with a single-frequency threshold. The 1-bit sampling approach is able to considerably reduce the quantization cost. However, when the sampling technique simplifies the SAR system by reducing the word length of each sample to only 1 bit, amplitude information of the SAR echo is lost and high-order harmonics are introduced, degrading the SAR imaging quality. The strategy of single-frequency threshold is able to linearly maintain the amplitude information and shifts the spectra of the harmonics away from the imaging component caused by the intermodulation. Hence, the imaging quality using 1-bit sampled data can be guaranteed. By selecting different SAR parameter groups according to a comprehensive consideration on spectrum aliasing, filter mismatching, and radio frequency interfering, a good tradeoff can be achieved between imaging quality and system simplification. Examples of ideal scatterers and a real measured scene are provided for quantitative analysis. Real measured RADARSAT-1 data are also imaged using the proposed scheme to validate its effectiveness.
Keyword:
1-bit sampling
single-frequency threshold
synthetic aperture radar (SAR)
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
8.6
论文数:
2.1W
被引数:
10.7W
机构
引用论文
Comparion of seismic response of single-layer reticulated dome under unform and incoherence three-directional excitations单层网壳结构在均匀与非均匀三向激励下的地震响应比较
Combined Effect of Initial Curing Temperature and Crack Width on Chloride Penetration in Reinforced Concrete Beams初始养护温度与裂缝宽度对钢筋混凝土梁中氯离子渗透的联合效应

