.png){kind=icon}
返回
Optimal sensor placement for structural response estimation
.png){kind=icon}
PRE
AI
DOI：10.1007/s11771-014-2387-4.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A methodology, termed estimation error minimization (EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing the limited sensor measurements, the entire structure response can be estimated based on the system equivalent reduction-expansion process (SEREP) method. In order to compare the capability of capturing the structural vibration response with other optimal sensor placement (OSP) methods, the effective independence (EI) method, modal kinetic energy (MKE) method and modal assurance criterion (MAC) method, were also investigated. A statistical criterion, root mean square error (RMSE), was employed to assess the magnitude of the estimation error between the real response and the estimated response. For investigating the effectiveness and accuracy of the above OSP methods, a 31-bar truss structure is introduced as a simulation example. The analysis results show that both the maximum and mean of the RMSE value obtained from the EEM method are smaller than those from other OSP methods, which indicates that the optimal sensor configuration obtained from the EEM method can provide a more accurate estimation of the entire structure response compared with the EI, MKE and MAC methods.
Keyword:
estimation error minimization (EEM)
system equivalent reduction-expansion process (SEREP)
optimal sensor placement (OSP)
root mean square error (RMSE)
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.4
论文数:
5.2K
被引数:
1.1W
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏Optimal sensor placement for spatial lattice structure based on genetic algorithms基于遗传算法的空间网格结构传感器优化布置
PREAI
分享收藏
查看更多内容