返回
Optimization of material processing profiles
DOI:10.1016/S1359-8368(97)00026-7.png)
摘要
En 中文
A definitive examination of the processing optimization of SiC/Ti-21S composite material is presented. Through the combination of a piecewise exact inelastic multiple concentric cylinder micromechanics model, a constitutive relation specifically designed for titanium alloy composites, and a nonlinear search optimization algorithm, a good overview of the advantages and problems of varying the processing parameters of time, temperature, and pressure is seen without any compromising assumptions. Four different failure modes are examined with respect to their material processing histories. By constraining the problem sufficiently to assure that complete consolidation of the composite takes place, the 'optimum' processing histories for each of the four objective functions is determined. In each case, only a limited improvement in the residual stress state is achieved. Of the four objective functions considered, the maximum change in any one stress component is approximately 12.5%, with the average change being around 8.0%. While this saving is significant, it may not be sufficient to alleviate all the problems associated with metal matrix composites. Similarly, the resulting stress savings may not be enough to warrant a redesign of the consolidation process hardware currently used in industry. (C) 1998 Elsevier Science Limited. All rights reserved.
Keyword:
processing
optimization
composites
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
14.2
论文数:
1.2W
被引数:
11.4W
机构
暂无机构信息
引用论文
The inpatient costs and hospital service use associated with invasive meningococcal disease in South Australian children
Vaccine
IF0
没有更多内容

