.png){kind=icon}
返回
Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation
.png){kind=icon}
PRE
AI
DOI：10.1016/j.apenergy.2012.12.003.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
For Solid Oxide Fuel Cells (SOFCs) to become an economically attractive energy conversion technology suitable materials which allow operation at lower temperatures, while retaining cell performance, must be developed. At the same time, the cell components must be inexpensive - requiring both low-priced raw material and cost-effective production techniques. In this work the perovskite-type La0.6Ca0.4Fe0.8Ni0.2O3 (LCFN) oxide has been used in order to optimize intermediate temperature SOFC cathode processing route. The advantages this material presents arise from the low temperature powder calcination (similar to 600 degrees C) and electrode sintering (similar to 800 degrees C) of LCFN electrodes, making them a cheaper alternative to conventional SOFC cathodes. An electrode polarization resistance as low as 0.10 Omega cm(2) at 800 degrees C is reported, as determined by impedance spectroscopy studies of symmetrical cells sintered at a range of temperatures (800-1000 degrees C). Scanning Electron Microscopy (SEM) studies revealed porous electrode microstructures, even when sintered at a temperature of just 800 degrees C. The competitive performance of the electrodes sintered at low temperatures, combined with the low raw material cost, make these electrodes an excellent potential choice for SOFC cathodes. In this work a new cathode processing technique is presented which provides a more economical, lower temperature SOFC production route with no detrimental effect on device efficiency. (C) 2012 Elsevier Ltd. All rights reserved.
Keyword:
Solid oxide fuel cell
Cathode
Perovskite
Electrochemical impedance spectroscopy
Microstructure
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
11
论文数:
2.6W
被引数:
23.2W
机构
引用论文
Optimized preparation conditions of yttria doped zirconia coatings on potassium ferrate (VI) electrode for alkaline super-iron battery.png)
APPLIED ENERGY
APPLIED ENERGYIF11
PREAI
分享收藏Effect of the preparation method on the catalytic activity of La1-xCaxFeO3 perovskite-type oxidesCATALYSIS TODAY
CATALYSIS TODAYIF5.3
PREAI
分享收藏Recent advances in magnetic structure determination by neutron powder diffraction中子粉末衍射测定磁结构的最新进展
PREAI
分享收藏
查看更多内容