.png){kind=icon}
返回
Overstrength values for light frame timber wall elements based on reliability methods
.png){kind=icon}
PRE
AI
DOI：10.1016/j.engstruct.2019.01.034.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
To ensure ductile behavior of light frame timber wall elements in the context of capacity design it is indispensable to design non-ductile parts and connections with considerable overstrength. The determination of overstrength values based on reliability methods enables to address different target failure probabilities. A two-step procedure is proposed. First a sensitivity analysis is carried out on 972 wall configurations. Within the configuration the nail diameter, the nail spacing, the sheathing material, the thickness of the sheathing, the arrangement of the sheathing, the length of the wall elements and the vertical load is varied to assess the influence of the varied parameters. Within the sensitivity analysis the overstrength values that ensure the target failure probability P-f = 0.04 within the range of P-f = 0.023 to P-f = 0.067 are determined using first-order reliability methods. The sensitivity analysis shows that the determination of overstrength values for different parameter configurations seems not to be necessary. For the second step the wall configurations that lead to the greatest overstrength values according to first-order reliability methods are identified. For these wall configurations the failure probability is determined using Monte-Carlo-Methods. The failure probability is determined using overstrength values within the range of gamma(Rd) = 1.0 to gamma(Rd) = 2.6 and minimum dimensions for the main load carrying parts of a timber frame wall element. The overstrength values that leads to an exact failure probability of P-f = 0.067 for the wall configurations are determined. The overstrength values determined on the selected wall configurations are used to calculate the failure probability for all 972 wall configurations using Monte Carlo-Methods. Finally, overstrength values are proposed to achieve ductile failure for all considered wall configurations for a certain level of probability.
Keyword:
Overstrength
Light frame
Timber
Wall elements
Capacity design
Monte-Carlo-Methods
期刊
IF:
6.4
论文数:
2.1W
被引数:
8.7W
.png){kind=icon}
