返回
Packaging Considerations and Evaluation Techniques for Integrated Liquid-Crystal-Based Modulators
DOI:10.1109/JPHOT.2025.3602012.png)
摘要
En 中文
在本工作中,我们讨论了将液晶(LC)成功封装到硅光子平台中的制造工艺、重要考虑因素和评估技术,以实现紧凑且低功耗的基于LC的集成调制器。首先,我们描述了我们的300-mm晶圆硅光子代工厂制造平台和芯片级LC封装工艺。其次,我们展示了用于分析LC对准不良的封装评估技术,采用标准显微镜和偏振显微镜。第三,我们开发并验证了一种基于热处理的程序以改善封装后LC的对准。第四,我们研究了热循环对集成LC基调制器完整性的影响,表明即使在1000次循环后也未出现显著性能退化。最后,我们展示了紫外(UV)暴露对集成LC基调制器性能的破坏性影响。本工作提供了关键见解,以促进高良率集成和集成LC基调制器在高密度集成系统中的广泛应用,这些系统需要紧凑且低功耗的调制器。
Keyword:
Modulation
Heating systems
Packaging
Microscopy
Optical waveguides
Phase modulation
Optical device fabrication
Degradation
Optical polarization
Optical modulation
Visible-light integrated photonics
liquid-crystal-based modulators
integrated-photonics platforms
integrated-photonics packaging
期刊
I
IF:
2.4
论文数:
194
被引数:
1.1W
机构
暂无机构信息
引用论文
Phase transition and dewetting of a 5CB liquid crystal thin film on a topographically patterned substrate
RSC Advances
IF0
Liquid-crystal-based visible-light integrated optical phased arrays and application to underwater communications
OPTICS LETTERS
IF3.3
Silicon-organic hybrid phase shifter based on a slot waveguide with a liquid-crystal cladding
OPTICS EXPRESS
IF3.3
Optical tuning of silicon photonic structures with nematic liquid crystal claddings
OPTICS LETTERS
IF3.3

