Packet-Level Index Modulation Based on Channel Activity Detection

doi:10.1109/TWC.2023.3303187

2024-04-01

PRE

DOI：10.1109/TWC.2023.3303187

原文链接

原文求助

摘要

En 中文

In recent years, long-range wide-area network (LoRaWAN) has attracted considerable attention due to its ability to realize massive machine-type communication (MTC); however, its throughput is limited by the duty cycle (DC). Packet-level index modulation (PLIM) can increase throughput by utilizing a data packet's frequency channel and transmission timing as the information-bearing index. In PLIM, a node selects a specific transmission resource (frequency channel and timing) within a frame and transmits a packet. If the node cannot transmit the packet at the specific transmission resource, it discards the packet. This packet discard results in throughput degradation of each node. Thus, this paper proposes an index mapping scheme that divides a frame into multiple subframes to provide each node with multiple transmission opportunities. A node performs channel activity detection (CAD) at the selected transmission resource within a subframe; if the node cannot transmit a packet, it moves to the next subframe. The proposed scheme adaptively maps the information bit sequence onto a transmission resource within each subframe based on the wireless environment and communication quality. Computer simulation results show that the proposed scheme improves throughput by increasing the transmission opportunities and reducing the packet discard rate under the constraint of DC.

Keyword:

Indexes

Time-frequency analysis

Wireless sensor networks

Wireless communication

Throughput

Frequency estimation

Channel estimation

Carrier sense

channel activity detection

LPWAN

LoRaWAN