返回
Parameter Estimation for a Lithium-Ion Battery From Chassis Dynamometer Tests
DOI:10.1109/TVT.2015.2495322.png)
摘要
En 中文
Simulation techniques are extensively used in vehicle performance evaluations, particularly for advanced vehicles such as hybrid electric vehicles ( HEVs), plug-in HEVs, and battery electric vehicles. It is necessary that the parameters used in simulation models are estimated properly so that the simulations can produce results that are close to real-world behaviors. This paper suggests methodologies for estimating parameters for a lithium-ion ( Li-ion) battery model by analyzing test data obtained from chassis dynamometer tests. A representative model based on a first-order equivalent circuit is used for the battery, and four main parameters of the model-source voltage, internal resistance, polarization resistance, and polarization capacitance-are obtained by characterizing the test results. The model is validated with the test data by applying the estimated parameters in the model, and the validation results show that the battery output voltage is calculated by the simulation model very well; 70% of simulations produce the output voltage within 1% of the root-mean-square error, as compared with the test data. Although the methodology cannot replace a conventional process that estimates the battery parameters from dedicated tests, the approach would be very feasible and save the effort and time needed to develop simulation models for Li-ion batteries.
Keyword:
Batteries
modeling
parameter estimation
testing
vehicles
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.1
论文数:
1.8W
被引数:
6.6W
机构
引用论文
Modeling and energy management control design for a fuel cell hybrid passenger bus燃料电池混合动力客车建模与能量管理控制设计
Characterization of Green Liquor Dregs, Potentially Useful for Prevention of the Formation of Acid Rock Drainage
Minerals
IF0

