返回
Parameters Affecting Efficient Solid Circulation Rate in Draft Tube Spouted Bed
DOI:10.1021/acs.iecr.8b01691.png)
摘要
En 中文
Solid circulation rate in a draft tube spouted bed is an important parameter for its industrial use. It can be manipulated adjusting the dimensions of the draft tube and entrainment height above the gas inlet nozzle and is studied here for a wide range of spouting gas velocities. A maximum entrainment height is identified and seen to show strong correspondence with the ratio between the projected volumes of annulus and spout zones below the draft tube. Overall energy loss at the spout-annulus interface has been reported for the first time as a function of particle size. Solid circulation rate is seen to be highly affected by flow resistance due to the passage of solid flow between conical apparatus wall and the draft tube and solid pressure in the annulus and can be well varied by changing the spouting gas velocity and fixing at a critical value.
Keyword:
BIOMASS FAST PYROLYSIS
DIFFERENT CONFIGURATION
HYDRODYNAMIC PERFORMANCE
CATALYST DEACTIVATION
HYDROGEN-PRODUCTION
PRESSURE-DROP
HEAT-TRANSFER
CYCLE TIMES
REACTOR
VOLATILES
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
I
IF:
3.9
论文数:
4.0W
被引数:
9.6W
机构
引用论文
High photocatalytic efficiency of spouting reactor compared with fluidized bed with top irradiation source
PARTICUOLOGY
IF4.3
Valorisation of different waste plastics by pyrolysis and in-line catalytic steam reforming for hydrogen production通过热解和在线催化蒸汽重整制氢对不同废塑料进行改性
Role of operating conditions in the catalyst deactivation in the in-line steam reforming of volatiles from biomass fast pyrolysis操作条件在生物质快速热解挥发物在线蒸汽重整中催化剂失活中的作用
FUEL
IF7.5
Investigations on heat transfer and hydrodynamics under pyrolysis conditions of a pilot-plant draft tube conical spouted bed reactor中试引流管锥形喷动床反应器热解条件下的传热和流体力学研究
HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production在串联喷出床-固定床反应器中进行HDPE热解-蒸汽重整以生产H2

